《10》Connecting to a Power SourceImportant information about battery usage● When the camera is not used, turn off the camera power.● Please remove the battery if the camera will not be used for long periods.Battery can lose power over time and are prone to leaking if kept inside thecamera.● Low temperatures (below 0˚C) can affect the performance of the batteryand you may experience reduced battery life.● Batteries will usually recover at normal temperatures.● During extended use of the camera, the camera body may become warm.This is perfectly normal.INFORMATIONBatterystatusBatteryindicatorThe battery isfully chargedLow batterycapacity (Prepareto rechargeor use sparebattery)Low batterycapacity(Prepare torecharge or usespare battery)Low batterycapacity(Prepare torecharge or usespare battery)■ There are 4 indicators for battery condition that are displayed on the LCDmonitor.Inserting the memory card■ Insert the battery as shown- If the camera does not turn on after youhave inserted battery, please checkwhether the battery is inserted with thecorrect polarity (+ / -).- When the battery chamber cover isopened, do not press the batterychamber cover by force. This may causedamage to the battery chamber cover.■ Insert the memory card as shown.- Turn off the camera’s power beforeinserting the memory card.- Have the front of the memory card facingtoward the front of the camera (lens) andthe card pins toward the back of thecamera (LCD monitor).- Do not insert the memory card the wrongway round. Doing so may damage thememory card slot.