《59》PictBridge : Print Setting PictBridge : Printing■ Printing Pictures1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab.2. Use the UP and DOWN buttons to select the desired sub menu value, andthen press the OK button.[Standard] : Print the pictures stored in thememory card in set numbers.One picture is printed on one piece ofpaper.[Index] : Print multiple images on one sheet ofpaper.PRINTStandardIndexMove: 3. The screen shown on the right will appear andthe picture will be printed. If no picture isselected, the [No Image!] message will bedisplayed. Press the LEFT button while printingto cancel the printing and the [PRINT] menu isdisplayed.※ Number of pictures in an index print variesdepending on the printer used.※ Some menu options are not supported in all manufacturer and printer models.If not supported, the menus are still displayed in the LCD, but are not selectable.※ If the setting values are not changed in the automatic / manual setting, thesetting values are automatically kept.MenuSetting the size of the printingpaperSetting the number of pictures tobe printed on a sheet of paperSetting the quality of the printingpaperSetting the quality of the pictureto be printedSetting whether to print the dateSetting whether to print the filenameSizeLayoutTypeQualityDateFile NameAuto, PostCard, Card, 4x6, L, 2L,Letter, A4, A3Auto, Full, 1, 2, 4, 8, 9, 16, IndexAuto, Plain, Photo, FastPhotoAuto, Draft, Normal, FineAuto, Off, OnAuto, Off, OnFunction Sub menu0001 / 0001Exit:ShutterNow Printing