Samsung DMR57 Training Manual

Also see for DMR57 Series: User manual Installation guide User manual User manual Installation guide

Contents

515) Remove the 2 screws holding the coverfan in place.6) Hold and remove both the case vent ASSYand the duct condenser ASSY.[Caution]- Be careful while removing them as theduct condenser is touching the bracketdoor link.7) Remove the 2 screws holding the fanmotor from the case vent ASSY. Andcarefully pull out the fan motor.8) Remove the duct condenser from the casevent ASSY (3 screws).※ Check List▶ Because there is a risk of leakage afterreplacement, check whether it is sealedproperly.▶ Check the voltage of Fan Vent ends: 120V▶ PCB RELAY : Check CN1 ~ CN14(120V)▶ Measure coil resistance of both ends: 150ΩFan Vent Disassembly Part 25. 6.7.8.5. Remove the 2 screws holding the cover fan in place. 6. Hold and remove boththe case vent ASSY. and the duct condenser ASSY. [Caution] - Be careful whileremoving them as the duct condenser is touching the bracket door link. 7. Removethe 2 screws holding the fan motor from the case vent ASSY. And carefully pull outthe fan motor. 8. Remove the duct condenser from the case vent ASSY (3 screws).Careful not to scratch or dent the stainless steel covers or the damage thecustomer's floor or cabinets.