Samsung DS-5064 User Manual

Also see for DS 5000 Series: User guide User instruction User guide User manual Quick reference guide

292. If allowed by your system administrator you may be able to initiate a pagefrom a speakerphone by pressing the PAGE key or dialing 55 without liftingthe handset.MEET ME PAGE• Lift the handset.• Press the Meet Me Page (MMPG) button or dial 54.• Dial the desired zone number.• After the attention tone, instruct the paged person to dial 56.• Press WAIT or TRANSFER.• Remain off-hook until the person dials 56 from any phone.• The paged person will be automatically connected with you.CALL PARK AND PAGEWhen you have an outside call for someone who is not at his/her desk, you canpark the call prior to paging. The system offers two different methods:MANUAL PARK ORBITS• While in conversation, press the PARK button.• Entered a desired orbit number (0-9), if the orbit number is busy dial anotherorbit number. Display users can press to automatically place the call in anyavailable orbit number and see the number in the display.• Remember the selected orbit number.• Replace the handset when finished.• Lift the handset and make a page announcement as previously described(example:“John Smith park two”).To retrieve a parked call from orbit:• Press the PARK button and dial the announced orbit number (0-9).• You will be connected to the parked call.NOTES:1. You must have a PARK button or park access code to retrieve and place callsin park orbits.2. If the parked call is not retrieved within a pre-programmed period of time, itwill recall your keyset and have a slow flashing amber light. You cannot parkand page intercom calls.3. If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button before you begin dialing.AUTOMATIC PARK WITH PAGE BUTTON• While in conversation, press the PAGE button.The call is automatically parkedat your station.