Samsung DVD-F1080 User Manual

Also see for DVD-F1080: Owner's instructions User manual User manual User manual Manual

30Setting Up the Anynet+(HDMI-CEC) (DVD-F1080 only)Anynet+ is a function that can be used to operatethe unit using a Samsung TV remote control, byconnecting the DVD-F1080 to a SAMSUNG TVusing a HDMI Cable. (see page 12) (This is onlyavailable with SAMSUNG TVs that supportAnynet+).Select On when you connecting the DVD-F1080with Samsung TV that support Anynet+.1. With the unit in Stop mode, press the MENU button.2. Press the / buttons to select Setup, then press the or ENTER button.MenuReturnEnterLanguage Setup Audio Setup Display Setup Parental Setup : DivX(R) Registration Anynet+(HDMI-CEC):On3. Press the / buttons to select Anynet+(HDMI-CEC),then press the or ENTER button.MenuReturnEnter4. Set the Anynet+(HDMI-CEC) to “On” on your DVD Player,then press the or ENTER button.Language Setup Audio Setup Display Setup Parental Setup : DivX(R) Registration Anynet+(HDMI-CEC):On• You can operate the DVD Player by using TVremote control. (TV buttons that can be used to control the DVD Player : , , , ,, , ,and buttons,buttons.).• When you press Anynet+ button on the TV remotecontrol, the below OSD will appear.View TVSelect Device®Menu on DeviceDevice OperationSetupReceiver : Off®®®®®Record ®ExitMove ENTERDVDPView TV ®TV Menu- Select Device : Use this option to select device.- Menu on Device : Same as MENU button on theDVD Player remote control.- Device Operation : Same as INFO button on theDVD Player remote control.Note• By pressing the PLAY button of the unit while watch-ing TV, the TV screen will change to the play screen.• If you play a DVD when the TV power is off, the TVwill power On.• If you turn the TV off , the DVD Player will poweroff automatically.• If you change the HDMI to other sources(Composite,Component,... etc) in TV while playing the DVD disc, the DVD Player will stop playing.MenuReturnEnterLanguage Setup Audio Setup Display Setup Parental Setup : DivX(R) Registration Anynet+(HDMI-CEC):OnOff√ On5. Set the Anynet+ function at your TV. (See the TV instructionmanual for more information.).NoteTo make the Setup menu disappear, press theMENU button.