ENG-9SetupS E T U PDescriptionFront Panel Controls1. STANDBY/ON ( )When STANDBY/ON is pressed on, the indicator goes outand the player is turned on.2. STANDBY IndicatorWhen the unit is first plugged in, the indicator lights.3. DISC TRAYPlace the disc here.4. OPEN/CLOSE ( )Press to open and close the disc tray.5. SKIP( ) / SEARCHUse to reverse skip a scene or music..6. STOP ( )Stops disc play.7. PLAY/PAUSE ( )Begin or pause disc play.8. SKIP ( ) / SEARCHUse to forward skip a scene or music.Rear Panel (DVD-FP580)1. DIGITAL AUDIO OUT JACKS- Use coaxial digital cable to connect to a compatibleDolby Digital receiver.- Use coaxial digital cable to connect to an A/V Amplifierthat contains a Dolby Digital, MPEG2 or DTS decoder.2. COMPONENT VIDEO OUT JACKS- Use these jacks if you have a TV with ComponentVideo in jacks. These jacks provide P R, P B and Y video.- If P-SCAN is set to “ON” in Video Output of the SetupMenu, progressive scan mode will work.- If I-SCAN is set to “ON” in Video Output of the SetupMenu, interlaced scan mode will work.3. AUDIO OUT JACKS- Use audio cables to connect to the Audio input jacks ofyour television or audio/video receiver4. VIDEO OUT JACK- Use a video cable to connect to the Video input jack onyour television.5. AC IN JACK- Use AC IN cable(Included) to connect this jack into thepower outlet.
