9ENGLISHUsing the Remote Control UnitConnecting Headphones to the DVDI Installing the Battery in the RemoteI Operating Range of Remote Control UnitImportant!Do not subject the remote control unit to strong vibration or shock.Keep the remote control unit free from moisture and water.Caution• After battery replacement, your remote control unit may not work.If this occurs, remove the battery and re-insert.• It may be difficult to operate the remote control unit if the remote controlsensor on the DVD player is exposed to direct sunlight or strong artificial light.Try operating the remote away from such light sources.• Remove the battery when not planning to use the remote control unit fora long period of time.You can attach headphones with a stereo mini-jack plug (not supplied) to the PHONES jackfor private listening. There are two jacks available.I How to use headphones1. Insert headphones into the A or B PHONES jack.• This jack is a stereo mini-jack.Note: When headphones are connected to jack A, you will hear soundthrough the headphones and over the speakers. When connected tojack B, sound is heard through the headphones and is mutedover the speakersHeadphone B disables the speakers.Important!1. Turn the headphone volume down to the minimum setting before connecting.2. Adjust the volume level by using the VOLUME control dial.1. Remove the battery compartment in the direction ofthe arrow.2. Place the lithium battery in the battery compartmentand put the battery compartment cover back on theremote.• Match the polarities (+ and -) on the battery with themarks in the battery compartment. If the battery isinserted in the wrong direction, your remote controlmay not work correctly.Hole(Back of the remote control)Remote Control Sensor