30Self-timer( ) / Right buttonWhen the menu is displayed on the LCD monitor, pressing the Right button makes the cursorshift to the right tab.When the menu is not displayed on the LCD monitor, the RIGHT button operates as theSelftimer( ) button. This function is used when the photographer would also like to be inthe image.[ Selecting the 10 SEC self-timer ]Selecting the self-timer1. Slide the mode switch to the STILL IMAGE or MOVIECLIP mode.2. Press the SELF-TIMER button until the desired modeindicator displays on the LCD monitor.A 2 second, 10 second or double self-timer icon appearson the LCD monitor. In Movie Clip mode, only the10-second self-timer will work.2SEC self-timer ( ) :Pressing the shutter button will allow an interval of 2seconds before the image is taken.10SEC self-timer ( ) :Pressing the shutter button will allow an interval of 10seconds before the image is taken.Double self-timer ( ) :A picture will be taken after about 10 seconds and 2seconds later a second picture will be taken.When using the flash, the 2-second self-timer may bedelayed for longer than 2 seconds depending on the flash charge time.3. When you press the SHUTTER button, the picture will be taken after the specified timehas elapsed.When taking a picture using the self-timer, the self-timer lamp works as follows:2 second self-timer setting : The self-timer lamp blinks at 0.25 second intervals for 2seconds.10 second self-timer setting : The self-timer lamp blinks at 1 second intervals for thefirst 7 seconds.It blinks at 0.25 second intervals for the remaining 3seconds.If you operate the Power button, Mode switch, Self-timer button and shutter button duringthe self-timer operation, the self-timer function is cancelled.INFORMATION