75Quick viewIf you enable Quick View before capturing an image, you can view the image you justcaptured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view ispossible only with still images.Setting Quick View1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [Q.VIEW] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[OFF] : The quick view function can’t be activated.[0.5, 1, 3 SEC] : The captured image is briefly displayed during the selected time.5. Press the menu button twice and the menu will disappear.Initialisation(RESET ALL)All camera menu and function settings will be restored to their default values.However, values for DATE/TIME and LANGUAGE will not be changed.Initialising the Camera1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [RESET] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.If [NO] is selected : Settings will not be restored to their defaults.If [YES] is selected : All settings will be restored to their defaults.5. Press the menu button twice and the menu will disappear. SETUPUSBLCDQ.VIEWBACK : SET : OKP0.5 SEC2272 SETUPLCDQ.VIEWRESETBACK : SET : OKNOYES2272P
