76Starting the slide showImages can be displayed continuously at pre-set intervals. You can view the slide show byconnecting the camera to an external monitor.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [Slide]menu tab.Start the slide show: The slide show can start only in the[Start] menu.1. Use the Up/Down buttons to select the [Start] menu.2. Press the OK button to start the slide show.- Press the Pause button to pause the slide show.- Press the Pause button ( ) again to resume the slide show.- To stop the slide show, press the play & pause button, and then press the LEFT or RIGHTbutton.Setting play interval: Set the slide show play interval.1. Select the [Interval] sub menu by pressing the UP/DOWN button and press the RIGHTbutton.2. Use the Up/Down buttons to select the desired interval.3. Press the OK button to save the configuration.Repeat setting : setting the slide show to repeat after the first cycle.1. Use the Up/Down buttons to select the [Repeat] menu and press the Right button.2. Use the Up/Down buttons to select the desired sub menu.[On] selected : The silde show is repeated until cancelled.[Off] Selected : The slide show is closed after one cycle.3. Press the OK button to save the configuration.The loading time depends on the image size and quality.While the slide show is playing, only the first frame of a MOVIE file is displayed.INFORMATIONExit: MENU Move :StartInterval 1 secRepeat OFFSlide
