83PictBridgeYou can use the USB cable to connect this camera to a printer that supports PictBridge (soldseparately) and print the stored images directly. TIFF, Movie clips and voice files cannot beprinted. You can set up the following settings from the PictBridge menu.Images : Select the pictures to be printed.PRINTER SETUP : Setting up printing(Auto Set/Custom Set)Print : Printing picturesDPOF Print : Printing the DPOF filesReset : Initialising the PictBridge functionsConnecting the Camera to a Printer1. Press the POWER button to turn on the camera.2. In a mode other than Voice Recording mode, press theMENU button.3. Press the LEFT/ RIGHT button and select [Setup] menutab.4. Select [USB] menu by pressing the UP/ DOWN buttonand press the RIGHT button.5. Select [Printer] menu by pressing the UP/ DOWN buttonand press the OK button.6. Press the menu button twice and the menu will disappear.7. Use the supplied USB cable to connect the camera to the printer as shown below.8. Turn on the printer to connect the camera to the printer.If you selected [Computer] in Step 5, when you connect the camera to your printer, the Modedial lamp(Green) will illuminate and the connection will not be established. In this case,disconnect the USB cable, and then follow the procedure from Step 2 and onward.Back: Set : OKSetupImprintSound ComputerUSB Printer
