32 Selecting the self-timer1. Select a Recording mode with theexception of Voice recording mode. (p.19)2. Press the SELF-TIMER / RIGHT ( )button until the desired mode indicatordisplays on the LCD monitor. A 10 second,2 second, Double self-timer or Motion timericon appears on the LCD monitor.3. When you press the SHUTTER button,the picture will be taken after thespecified time has elapsed.Self-timer ( ) / Right button[Selecting the 10 SECself-timer] Self-timer mode indicatorIcon Mode Description10SECself-timerPressing the shutter button will allow an intervalof 10 seconds before the image is taken.2SECself-timerPressing the shutter button will allow an intervalof 2 seconds before the image is taken.Doubleself-timerA picture will be taken after about 10 secondsand 2 seconds later a second picture will betaken. When using the flash, the 2-secondself-timer may be delayed for longer than 2seconds depending on the flash charging time.MotionTimerThe camera detects the subject's movement 6seconds after pressing the Shutter button, and thepicture is taken when the movement is stopped. The Motion Timer flows are as followings. (Movie Clip mode excluded)Selecting the Motion Timer Pressing the Shutter button Confirming the composition (Within 6 sec.) *1 Starting thedetection (Swing your hands fully) *2 Stopping the detection(Do not move) Taking an image (after 2 sec.)*1: The camera detects the subject's movement 6 seconds after pressing theShtter button, so confirm the composition within 6 seconds.*2: Move your body or hands fully.In the following cases, the Motion Timer may not operate. The focus distance is over 3m. The exposure is too bright or dark In backlight conditions. The movement is insignificant The movement is detected beyondthe center part (50%) of the sensorwhere the movement is recognized. If the camera doesn`t sense anymovement for 30 seconds, or thecamera doesn’t sense stillnessafter sensing movement Motion TimerMotion Icon & Self-timer lampPressing the Shuter button aftersetting the Motion Timer Blink (1 second interval)Detecting the subject's movement Blink (0.25 second interval)No movement is detected Turn on and the image is takenafter 2 secondsThe detection range ofMotion Timer