65Starting the Multi Slide Show ( )Images can be displayed continuously at pre-set intervals.You can view the Multi Slide Show by connecting the camera to anexternal monitor.1. Press the play mode button and press the menu button.2. Press the Up / Down button and select the [Multi Slide Show]menu tab and press the OK button.Start the Multi Slide ShowThe Multi Slide Show can start only in the [Start] menu.1. Use the Up / Down buttons to select the [Start] menu and pressthe Right button.2. Select a desired sub menu by pressingthe Up / Down button.[Play] : The Multi Slide Show isclosed after one cycle.[Repeat] : The Slide show is repeateduntil cancelled.3. Press the OK button and the slideshow will be started.- To pause the slide shown while playing it back, press the OKbutton again.- Pressing the OK button again will cause the Multi Slide Showrestart.- To stop playback of the Multi Slide Show, press the OK button,and then press the Left or Right button. Contrast controlYou can change the contrast of the image.1. Select ( ) by pressing the Left/Rightbutton and press the OK button. Thena bar for selecting the contrast will bedisplayed.2. Change the contrast by pressing theLeft/Right button.3. Press the OK button and the image will besaved as a new file name.Edit ( ) Saturation controlYou can change the saturation of the image.1. Select ( ) by pressing the Left/Rightbutton and press the OK button. Thena bar for selecting the saturation will bedisplayed.2. Change the saturation by pressing theLeft/Right button.3. Press the OK button and the image will besaved as a new file name.Back MoveContrastBack MoveSaturationBack SetImages :AllEffect :OffInterval :1 secMusic :OffStart PlayRepeat