Samsung FP-T5084 Owner's Instructions Manual

Also see for FP-T6374: Manual Safety instructions Owner's instructions Owner's instructions Owner's instructions

Reducing the Effects of Screen Burnif screen burn has occurred, you can select a white screen or scrolling to help remove screen burn artifacts.123Press the MENU button to display the menu.Press the _, or _' button to select Setup, then press the ENTER button.Press the A or T button to select Screen Burn Protection, then press theENTER button.Press the A or T button to select White, Scrolling, or Side Graythen press the ENTER button.Press the EXIT button to exit.WhiteThis function removes after-images on the screen by changing the color of pixels towhite. Use this function when there are remaining after-images or symbols on thescreen especially when you displayed a still image on the screen for a tong time.This function removes after-images on the screen by moving all the pixels on thePDP according to a pattern. Use this function when there are remaining after-imagesor symbols on the screen especially when you displayed a still image on the screenfor a tong time.Side GrayWhen you watch TV with the screen ratio of 4:3, the screen is prevented from anydamage by adjusting the white balance on both extreme left and right sides.To prevent the screen burn from happening, select Dark or Light.* Dark: When you setthe screen ratio to 4.:3,it darkens the left and right sides.Light: When you setthe screen ratio to 4:3, it brightens the left andright sides._-- To remove after-images on the screen, use either the White or Scrollingfunction. Although both functions remove after-images on the screen, Scrollingis more effective._-- The after-image removal function has to be executed for a long time(approximately 1 hour) to effectively remove after-images on the screen. If theafter-image is not removed after performing the function, repeat the functionagain.:,_ Press any key on the remote control to cancel this feature.Setting the Function HelpDisplays help on the menu functions.1 Press the MENU button to display the menu.Press the _, or T button to select Setup, then press the ENTER button.2 Press the _, or T button to select Function Help, then press the ENTERbutton.3 Press the _, or T button to select Off or On, then press the ENTER button.Press the EXIT button to exit._-- The Function Help default setting is On.