Samsung FP-T5084 Owner's Instructions Manual

Also see for FP-T6374: Manual Safety instructions Owner's instructions Owner's instructions Owner's instructions

Using the Photo (JPEG) ListYou can play back the ,JPEG files saved on a memory device in various ways.1 After switching the mode to WISELINK, select the memory device that you haveinserted. (Refer to page 63)2 Press the 41 or _ button to select Photo, then press the ENTER button.JPEG files and existing folders are displayed.Press the A/T/4/I_ buttons to select a file, then press the ENTER button.:_ Pressing the button over a photo icon displays the currently selected photoin full screen. However, JPEG files smaller than 640x480 pixets are zoomed-in at 4 times their original size. (e.g. If a photo's original size is 200x200pixets, it is displayed at 800x800 pixels.)_-- Press the INFO button and select View to view a photo image at its originalsize.:_ Pressing the button over a folder icon shows the JPEG files included in thefolder._-- While a full screen is displayed, 41 or 1_ buttons will let you see anotherphoto image in the same folder._-- Press the PLAY/PAUSE button when a Photo icon is selected to start a SlideShow.To exit WISELINK mode, press the WISELINK button on the remote control._-- Moving to a photo may take a few seconds because the file needs to beloaded. At this point, the icon will appear.:,_ This menu shows only the files whose extension is jpeg (or jpg).Files with other formats such as gif or tiff will not be displayed._-- Fifteen thumbnail photos are displayed per page.:,_ The thumbnails are numbered from left to right and from top to bottom, from1 to 15.:,_ Folders are displayed first and they are followed by all JPEG files in thecurrent folder. The folders and JPEG files are sorted in alphabetical order._-- If the photo is displayed in full screen, you can zoom in and out or rotate thephoto on the screen. (Refer to pages 68~69)_-- It takes a while to show JPEG files as thumbnail images._-- WISELINK for this product supports JPEG files up to 8K x 8K pixels. Forprogressive JPEG files or files whose size exceeds 8MB, the photo will bedisplayed as a thumbnail only. When trying to view a progressive JPEG file,the message Not supported mode will appear. When trying to view a fileexceeding 8MB, the message This file is too large to decode will appear._-- The higher the image resolution advances, the longer the display time takes.:,_ You cannot decode images beyond a horizontal resolution of 5000.:,_ You cannot decode images beyond a vertical resolution of 4000.Press the WISELtNK button on the remote control to turn on the WISELINK mode.Folder icon_,_ : Move to the previousfolder stage iconOOC