1813. Accept the current device name.– or –Tap the Device name field and use the on-screenkeyboard to rename your device.Important! The device name is also used to provide anidentification for your device’s Bluetooth and Wi-FiDirect names.14. Tap Finish to complete the setup process.15. Read the on-screen Collect diagnostics information.Note: This software collects only diagnostic data from yourdevice so that T-Mobile technicians can bettertroubleshoot issues with your device.16. Select either More Info (to read additional information)or Close to close the message screen.Important! Selecting Close only closes the current descriptionscreen and does not disable data collection.To disable data collection, go to Settings ➔Accounts tab ➔ Backup and reset ➔ Collectdiagnostics and turn off the Allow diagnostics to becollected feature. For more information, refer to“Collect Diagnostics” on page 323.Switching the Device On or OffOnce the device has been configured, you will not beprompted with setup screens again.To turn the device on: Press and hold (Power/End) until the deviceswitches on.The device searches for your network and after findingit, you can make or receive calls.Note: The display language is preset to English at the factory.To change the language, use the Language menu. Formore information, refer to “Language and InputSettings” on page 305.
