Connections 253Configuring Bluetooth Device SettingsSome connected Bluetooth devices are capable of more thanjust functioning as a headphone, but also have built inmicrophones for picking up voice. Although both functionsare detected by the device and activated, there might betimes when you need to change or update these settings forPhone and Media Audio:• I can hear the other person but they can’t hear me...• I want to use my Bluetooth device only as a headphone1. Verify Bluetooth is active.2. From the Bluetooth settings page, tap (Settings).3. Toggle the Call audio field to activate/de-activate theBluetooth device’s on-board microphone.4. Toggle the Media audio field to activate/de-activate theBluetooth device’s headset functions.Note: If callers can not hear you during a call while using apaired Bluetooth headset (with built-in microphone),verify the Call audio option is enabled within the entry’sBluetooth Settings page.Disconnecting a Paired Bluetooth DeviceDisconnecting a paired device breaks the connectionbetween the device and your phone, but retains theknowledge of the pairing. At a later point when you wish toreconnect the device, there is no need to setup theconnection information again.1. Verify your Bluetooth is active.2. From the Bluetooth settings page, tap the previouslypaired device (from the bottom of the page).3. Tap OK to confirm disconnection.Note: Disconnections are manually done but often occurautomatically if the paired device goes out of range ofyour phone or it is powered off.Deleting a Paired Bluetooth DeviceDeleting a device from your list removes its “connectionrecord” and upon reconnection would require that youre-enter all the previous pairing information.1. Verify Bluetooth is active.2. From the Bluetooth settings page, tap (Settings)➔ Unpair to delete the paired device.
