87SSeettttiinnggss3. Press the Remove soft key.The phone sends your settings to the network andthe network’s acknowledgement is displayed.You can also deactivate all call diverting settings byselecting the Cancel All option.Note: When all calls are diverted, one of theindicators below is displayed on the last line ofthe display,if supported by your SIM card.Divert Line 1: all calls from line 1 are diverted.Divert Line 2: all calls from line 2 are diverted.Divert All: all calls from lines 1 and 2 arediverted.Call BarringThe call barring network service allows you torestrict your calls.Call barring can be set up in the following ways.All outgoing: calls cannot be made.International: international calls cannot be made.International except to home: when abroad, callscan be made only to numbers within the currentcountry and to your home country, that is the countrywhere your home network provider is located.All Incoming: calls cannot be received.Incoming while abroad: calls cannot be receivedwhen you are using your phone outside your homeservice area.Cancel All: all call barring settings are deactivated;calls can be made and received normally.86SSeettttiinnggssExample: You can:• Systematically divert fax calls to youroffice fax machine• Divert voice calls to your colleague ifyou are already using the phoneTo set your call diverting options, proceed as follows.1. Select the type of call diverting required bypressing or until the appropriateoption is highlighted, and then press the Selectsoft key.2. Select the type of calls to be diverted by pressingor until the appropriate option ishighlighted and then press the Select soft key.3. Press the Activate soft key to confirm your settings.4. Enter the number to which the calls are to bediverted.To enter the international code, press and hold 0until the + sign is displayed. You can also select anumber in the phonebook or the voice servernumber, by pressing the Options soft key,followed by PhoneBook or Voice ServerNumber.5. When you are satisfied, press or the OK softkey.The phone sends your setting to the network andthe network’s acknowledgement is displayed.To deactivate specific call diverting settings, proceedas follows.1. Select the call diverting option to be deactivated.2. Select the type of call to which this option applies.