89SSeettttiinnggssChange Barring Password: you can set andchange the call barring password obtained from yourservice provider using this option. You must enter thecurrent password before you can specify a new one.Once you have entered a new password, you areasked to confirm it by entering it again.Call WaitingThis network service enables you to be informed whensomeone is trying to reach you during another call.To set your call waiting options, proceed as follows.1. Select the type of calls to which the call waitingoption is to be applied by pressing oruntil the appropriate option is highlighted andthen press Select.2. Press the Activate soft key to confirm yoursettings.The phone sends your settings to the network andthe network’s acknowledgement is displayed.To deactivate specific call waiting settings, proceedas follows.1. Select the type of call to which the option applies.2. Press the Deactivate soft key.The phone sends your settings to the network andthe network’s acknowledgement is displayed.You can also deactivate all call waiting settings byselecting the Cancel All option.88SSeettttiinnggssTo set your call barring options, proceed as follows.1. Select the type of call barring required by pressingor until the appropriate option ishighlighted and then press the Select soft key.2. Select the type of calls to be barred by pressingthe or key until the appropriate optionis highlighted and then press the Select soft key.3. Press the Activate soft key to confirm yoursettings.4. Enter your call barring password supplied by yourservice provider.The phone sends your settings to the network andthe network’s acknowledgement is displayed.To deactivate specific call barring settings, proceedas follows.1. Select the call barring option to be deactivated.2. Select the type of call to which this option applies.3. Press the Remove soft key.4. Enter your call barring password supplied by yourservice provider.The phone sends your settings to the network andthe network’s acknowledgement is displayed.You can also deactivate all call barring settings byselecting the Cancel All option.