Samsung GH68-26097A User Manual

Also see for Freeform: User manual Manual Del Usuario

Contents

Tools 68The following options appear in the display:• Voice Commands — Lets you place calls, access the ContactsList, review appointments, and more by speaking commands intothe phone. (Also see “Making a Call — Voice Dialing” on page18 and “Voice Method” on page 30 for more information.)• Voice Settings — Lets you adjust VoiceSignal settings.2. Select the desired sub-menu.Voice CommandsTo start VoiceSignal, do one of the following:• In Standby mode, press and hold .“Say a Command” appears in the display and is pronounced throughthe earpiece, followed by a list of available commands.• At the Tools menu, select Voice SVC ➔ Voice Command.Note: You can set the phone to start VoiceSignal when you open the phone.(For more information, refer to “Voice Launch” on page 71)VoiceSignal includes the following commands:– Call — Lets you dial the phone by saying any name stored in thecontact list, without ever having to record, or “train” that name.VoiceSignal automatically voice-activates all the contacts, even if youhave hundreds of them stored on the phone. You can also dial anytelephone number, even if it is not stored in the contact list, by sayingthe digits in the number. (For more information, refer to “Making aCall — Voice Dialing” on page 18.)– Send Text — Lets you launch the Create Txt Msg screen. (For moreinformation, refer to “Creating and Sending a Text Message” onpage 38.)– Send Picture — Lets you launch the Create Pic Msg screen. (Formore information, refer to “Creating and Sending a PictureMessage” on page 39)– Lookup — Lets you look up and display contact information for anyname stored in the Contacts list by saying the name. (For moreinformation, refer to “Finding a Contacts Entry” on page 30.)– Go to — Lets you access all of the Main Menus on the phone.– Check — Lets you check the phone's status (that is, networkcoverage, signal strength, and battery in the same report), networkcoverage, signal strength, battery, and phone number.Note: Speaking clearly, say the command that you want to use.If, after a few seconds, the device has not recognized a command, itprompts you to repeat the command.If, after a few more seconds, it still has not recognized a command, ittells you “Sorry, no match found,” and cancels voice recognition.Voice Command Tips:• Make sure you wait for the beep before speaking.• Speak clearly at a normal volume, as if you were talking on the phone.