Changing Your Settings 1326. To save your new ringer settings and return to the SoundSettings menu, press the OK soft key.AlertsYou can set your phone to sound an alert whenever you enter orleave your service area, connect or disconnect a call, as well asother options.1. From the Settings menu, select Sounds Settings ➔ Alerts.The following Alerts options appear in the display:• Minute Beep — Sounds an alert ten seconds before each elapsedminute of a call.• Roaming — Sounds an alert when you leave your home servicearea during a call.• Call Connect — When you make a call, an alert sounds when thecall is answered.• Power On — Plays a melody when the phone is being turned on.• Power Off — Plays a melody when the phone is being turned off.2. Select the desired Alert option setting (On or Off).3. To save your new alert settings and return to the SoundSettings menu, press the OK soft key.Key ToneKey Tone lets you select the volume and the length of the DTMFtones that the r860 sends when dialing.1. From the Settings menu, select Sounds Settings ➔ KeyTone.The following options appear in the display:• Tone Level — Lets you set the volume for the key tones (Silence,Low, Low/Medium, Medium, Medium/High, High).• Tone Length — Lets you set the length of the key tones (Short,Long).2. To save your new setting and return to the Key Tone menu,press the OK soft key.Vibrating AlertVibrating Alert lets you set your phone to vibrate in sync withringtones and melodies your phone plays.1. From the Settings menu, select Sounds Settings ➔Vibrating Alert.2. Select On or Off.3. To save your new setting and return to the Sound Settingsmenu, press the OK soft key.Call Settings From the Settings menu, select Call Settings. The followingoptions are available.Call AnswerYou can select a specific answer mode when you receive anincoming call.
