Connectivity 79Set the IEEE 802.1x access option and the extensible5 authentication protocol (EAP) type (if necessary) andselect Finish.The new WLAN network will appear on the screen.Customise the WLAN settings› From the Start menu, select1 Settings → Connections→ Wi-Fi.Select2 Menu → Configuration.Adjust the following settings:3Option FunctionTurn on availablenetworknotificationSet the device to alert you toavailable WLANs.Turn off Wi-Fi ifnot connected inSet the WLAN feature toautomatically turn off after aspcified length of time.Select2 next to Wi-Fi to activate the WLAN feature.The device will start searching and display the list ofWLAN APs.Select the check box next to an AP.3 The device will attempt to connect to the WLAN.Enter a password and select4 OK (if necessary).Create a new WLAN connection› From the Start menu, select1 Settings → Connections→ Wi-Fi.Select2 Menu → Add New.Enter network parameters and a network name and3 select Next.Configure settings for network authentication and4 data encryption and select Finish or Next, dependingon the authentication type.If you selected Next, continue with the next step.
