Samsung GT-B7702 Service Manual

SAMSUNG Proprietary-Contents may change without notice11. Disassembly and Assembly Instructions11-1This Document can not be used without Samsung's authorization11-1. Disassembly1643251) Disassemble 6POINT of REAR SCREW [Figure 1]1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!1) Disassemble 2 Point OF LEFT REAR HOOK With Disassemble tool.[Figure 1]2) Disassemble 2 Point OF RIGHT REAR HOOK With Disassembletool.[Figure 2]1) Be careful not to make scratch and molding damage!1) Widen up_side of rear and push left and right to fully disassemblethe hooks2) Push up_side of rear to disassemble the hooks on down_side.1) Disassemble TSP CONNECTOR and take out the FPCB with TWEEZERS[Figure 1]2) Disassemble LCD CONNECTOR and take out the FPCB withTWEEZERS.[Figure 2]1) When disassembling, Be careful not to damage component nearbyconnector .2) Be careful not to damage FPCB.1) Hold low side of Front and bracket disassemble PBA ASSY and FrontASSY.[Figure 1]1) Disassemble 5 point of Screws.[Figure 1]< Figure 1 >< Figure 1 >< Figure 1 > < Figure 1 >< Figure 2 >< Figure 1 >1) Be careful not to damage FPCB2) When disassembling, Be careful not to damage component nearbyconnectorScrew(M1.4, L4.0)Torque 1.1 ~ 1.3Kgf.cm < Figure 2 >TSP Connector LCD Connector< Figure 2 >Hook 2 Point Hook 2 Point< Figure 1 >Screw(M1.4, L3.5)Torque 1.0 ~ 1.2Kgf.cm