Samsung GT-B7702 Service Manual

SAMSUNG Proprietary-Contents may change without noticeExploded View and Parts List11-4This Document can not be used without Samsung's authorization71) Be careful not to damage FPCB.1) Assemble B/T antenna on guide rib.[Figure 1]< Figure 1 >81) Assemble PBA Assy on Front Assy.[Figure 1]< Figure 1 >91) Make sure not to damage TSP FPCB, and combine properly.2) 핀셋으로 주위 부품 파손에 주의한다.1) Assemble TSP FPCB with tweezers.[Figure 1]2) Assemble TSP FPCB fixing on the line with tweezers.[Figure 2 ]< Figure 2>< Figure 1>101) Be careful not to damage FPCB LCD FPCB.2) Check combining of FPCB.1) Assemble LCD FPCB. [Figure 1]< Figure 1 >1,2) After assembling, make sure there are no gap.111) Hook left of Up_side of REAR. [Figure 1]2) Hook Up_side and right of REAR.[Figure 2]TSP FPCB1) Be careful not to jammed TSP FPCB and LCD FPCB .2) Be careful not to damage FPCB, and double check thecombining.LCD FPCB< Figure 1 > < Figure 2 >TSP FPCBB/T Antenna FPCBLCD FPCBScrew(M1.4,L3.5)Torque 1.1 ~1.3Kgf.cm< Figure 1>1) SCREW 6 POINT.[Figure 1]1) Be carful about SCREW type and Torque.12

/ 77

Related manuals for Samsung GT-B7702