1666. On the Personalize screen, tap Personalize topersonalize program suggestions or Skip to skip thisstep.7. At the PEEL DISCLAIMER screen, tap Agree to acceptthe disclaimer.8. From the top of the main screen, tap (RemoteControl) ➔ Set up now.9. From the Select your TV brand screen, tap your TV’smanufacturer name.• If you have a brand of TV not listed or you are using aprojector, select from one of the following two options.Choose from either Show other brands or I have a homeprojector.10. Aim your device at the TV and tap (Power) toconfirm the set up process completed successfully andthe correct TV IR codes were selected.Note: The process of the initial TV activation can take up to 10seconds. Please do not press the button again.11. If the TV turned on, tap Yes, this code 1 works.– or –If the TV did not turn on after tapping (Power) andwaiting 10 seconds, tap No, test next code 2 or Send thiscode 1 again.12. From the Select your channel source screen, select theentry that corresponds to your current channel controlmethod:• Set-top box: selected when changing channels is done via areceiver box. Channels are not changed via the TV remotebut rather through the receiver/box.• My xxx TV: selected when a signal is fed directly into the TVand no box is used. Channels are changed directly on the TVby using the TV remote and not a box’s remote.Note: Try matching your current channel selection method.13. Select the receiver box brand from the available list.Using WatchONTo change channels:1. Sign into your Samsung account.2. From the Home screen, tap ➔ WatchON .
