Call Functions 43– One-handed operation on/off: Allows you to operate the devicewith one hand.Personalizing the Call Sound SettingDuring a call it may be necessary to adjust the sound of theincoming call by selecting an audio equalizer setting for thecurrent call.1. From the call screen, tap .2. Confirm the option is enabled .3. Select an available option. Choose from: Off, Softsound, Clear sound, and Adapt Sound left, or AdaptSound right.Activating Noise ReductionDuring a call it may be necessary to activate the noisereduction feature. Activating this feature can improve thequality of your conversation by reducing ambient noise. Noisereduction in on by default.1. Press to turn Noise reduction off.2. Press to turn Noise reduction on.Placing a Call on HoldYou can place the current call on hold at any point during aconversation. You can also make another call while you havea call in progress if your network supports this service.1. While on a call, tap Hold . This action placesthe current caller on hold.2. You can later reactivate this call by tapping Unhold.To make a new call while you have a call in progress1. Tap Hold .2. Tap Add call to display the dialer.3. Enter the new number and tap .Once connected, the active call will appear in a largebox at the top of your screen and the call on hold willappear in a smaller box in the middle of your screen.Switching Between CallsWhen you have an active call and a call on hold, you mayswitch between the two calls, changing the one on hold toactive and placing the other on hold.1. Tap Swap.HoldUnholdHold
