DRAFTInternal Use Only12To remove the microSD Memory Card:1. Remove the battery cover.2. Firmly press the card into the slot and release it. Thecard should pop partially out of the slot.3. Remove the card from the slot.4. Replace the battery cover.Installing the BatteryBefore using your device for the first time, install the batteryand charge it fully.Important! Before removing or replacing the battery, makesure the device is switched off. To turn the deviceoff, hold down the key until the Deviceoptions pop up displays, then tap Power off.To install the battery:1. Slide the battery into the compartment (1) so that thetabs on the end align with the slots at the bottom of thephone, making sure the connectors align.2. Gently press down to secure the battery (2).To remove the battery: Grip the battery at the top end and lift it up and out ofthe battery compartment.Replacing the Battery Cover Position the battery cover over the batterycompartment and press down until you hear a click.Caution! When replacing the battery cover, do not applypressure to the screen (“squeeze”) as this candamage the screen.
