Getting Started 10Using the Travel ChargerImportant! Verify that the handset battery is installed prior toconnection. If the battery is not properly installedand the wall charger is connected, the handsetmay power off and on continuously, preventingproper operation.1. Plug the flat end of the Travel Charger into the Power/Accessory Interface connector and the other end into astandard AC wall outlet.2. When charging is finished, remove the flat end fromthe interface connector jack on the phone.Warning! If your handset has a touch screen display, pleasenote that a touch screen responds best to a lighttouch from the pad of your finger. Using excessiveforce or a metallic object when pressing on the touchscreen may damage the tempered glass surface andvoid the warranty. For more information, refer to“Standard Limited Warranty” on page 256.Note: Failure to unplug the wall charger before you remove thebattery, can cause damage to the phone.Correct Incorrect
