10Removing the microSD Memory Card1. Remove the slot cover.2. Firmly press the card into the slot and release it. Thecard should pop partially out of the slot (2).3. Remove the card from the slot.4. Replace the slot cover.BatteryYour device is powered by a rechargeable, standard Li-Ionbattery. A Wall/USB Charger (Charging Head and USB cable)are included with the device for charging the battery.Note: The battery comes partially charged. You must fullycharge the battery before using your device for the firsttime.After the first charge, you can use the device whilecharging.Warning! Use only approved charging devices. Approvedaccessories are designed to maximize battery life.Using other accessories may invalidate yourwarranty and may cause damage.Battery IndicatorThe Battery icon in the Status Bar shows the batterypower level. When battery power is 15% or less, your deviceprompts you to charge the battery. If you continue to operatethe device without charging, the device powers off. Forbattery use information, see “About Device” on page 247.Tip: Tap the Time field to display battery charge status.Charging the BatteryYour device comes with a Wall/USB Charger (OutletConnector, Charging Head, and USB cable) to charge yourdevice from any standard AC power outlet.Note: The battery comes partially charged. You must fullycharge the battery before using your device for the firsttime.After the first charge, you can use the device whilecharging.
