English - 55Upgrading the SoftwareSamsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG toreceive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB driveto the USB port located on the back of your TV.1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the backof the TV.2 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Setup, then press the ENTER button.3 Press the ▲ or ▼ button to select SW Upgrade, then press the ENTER button.4 Press the ▲ or ▼ button to select USB, then press the ENTER button.The message Scanning for USB... It may take up to 30 seconds. is displayed.5 If the firmware on the USB is properly recognized, the message Upgrade version xxxx toversion xxxx? The system would be reset after upgrade. is displayed.Press the ◄ or ► button to select OK, then press the ENTER button. The upgrade starts.Please be careful to not disconnect the power or remove the USB drive while upgrades arebeing applied.The TV will shut off and turn on automatically after completing the firmware upgrade.Please check the firmware version after the upgrades are complete.➢ The firmware and upgrade process may be different by country and region.PictureMove Enter ReturnMoreFilm Mode : Off ►Function Help : On ►SW Upgrade ►▲Move EnterSetupReturnPictureMove Enter ReturnUSB ►Move EnterSW UpgradeReturnPlug & PlayUpgrade version XXXX to version XXXX ? Thesystem would be reset after upgrade.OK CancelSoftware UpgradeScanning for USB...It may take up to 30 seconds.Software Upgrade
