English - 13Connecting a VCRVideo ConnectionThese instructions assume that you have already connected your TV to an antenna or a cable TV system (according to theinstructions on pages 11~12). Skip step 1 if you have not yet connected to an antenna or a cable system.1 Unplug the cable or antenna fromthe rear of the TV2 Connect the cable or antenna tothe ANT IN terminal on the rear ofthe VCR.3 Connect an Antenna Cablebetween the ANT OUT terminalon the VCR and the ANT 1 IN(CABLE) or ANT 2 IN (AIR)terminal on the TV.4 Connect a Video Cable betweenthe AV IN 1 [VIDEO] (or AV IN 2[VIDEO]) jack on the TV and theVIDEO OUT jack on the VCR.5 Connect Audio Cables between theAV IN 1 [L-AUDIO-R] (or AV IN 2[L-AUDIO-R]) jacks on the TV andthe AUDIO OUT jacks on the VCR.➢ If you have a “mono”(non-stereo) VCR, use aY-connector (not supplied) tohook up to the right and leftaudio input jacks of the TV. Ifyour VCR is stereo, you mustconnect two cables.➢ Each VCR has a different panel configuration.➢ When connecting a VCR, match the color of the connection terminal to the cable.S-Video ConnectionYour Samsung TV can be connectedto the S-Video jack of a VCR.(This connection delivers a betterpicture when compared to theregular video connection above.)1 To begin, follow steps 1–3 in theprevious section to connect theantenna or cable to your VCR andyour TV.2 Connect an S-Video Cablebetween the AV IN 1 [S-VIDEO](or AV IN 2 [S-VIDEO]) jack on theTV and the S-VIDEO OUT jack onthe VCR.3 Connect Audio Cables between theAV IN 1 [L-AUDIO-R] (or AV IN 2[L-AUDIO-R]) jacks on the TV andthe AUDIO OUT jacks on the VCR.➢ Each VCR has a different panel configuration.➢ When connecting a VCR, match the color of the connection terminal to the cable.➢ Some games may be displayed with a cut off picture when the TV is connected to a game player.2TV Rear PanelVCRTV Rear PanelVCR1Antenna cable(Not supplied)3Audio cable(Not supplied)5Video cable(Not supplied)4Antenna cable(Not supplied)1Audio cable(Not supplied)3S-Video cable(Not supplied)21
