English - 28Picture ControlUsing Automatic Picture SettingsYour TV has three automatic picture settings (“Dynamic”, “Standard”, “Movie”) that are preset at the factory.You can activate a Picture Setting by making a selection from the menu.1 Press the MENU button.Press the ENTER button to select Picture.Press the ▲ or ▼ button to select Mode, then press the ENTER button.2 Press the ▲ or ▼ button to select Dynamic, Standard, or Movie, then press the ENTERbutton. Choose Dynamic to increase the clarity and sharpness of the picture. Choose Standard for general TV watching mode. Choose Movie when watching movies.Press the P.MODE button on the remote control to select one of the standard picturesettings.3 Press the ▲ or ▼ button to select Contrast, Brightness, Sharpness, Color, or Tint, thenpress the ENTER button.4 Press the ◄ or ► button to decrease or increase the value of a particular item.Press the ENTER button.➢ ● In PC mode, only the Contrast and Brightness can be selected.● Each adjusted setting will be stored separately according to its input mode.● When you make changes to Contrast, Brightness, Sharpness, Color, or Tint,OSD color will also be adjusted accordingly.Continued...PictureEnterPictureModeContrast 100Brightness 45Sharpness 75Color 55Tint G50 R50Color ToneDetailed SettingsSizeReturnDynamicCool116:9PictureEnterPictureModeContrast 100Brightness 45Sharpness 75Color 55Tint G50 R50Color ToneDetailed SettingsSizeReturnDynamicCool116:9DynamicStandardMoviePictureEnterPictureModeContrast 100Brightness 45Sharpness 75Color 55Tint G50 R50Color ToneDetailed SettingsSizeReturnDynamicCool116:9▲Contrast▼100PictureEnter ReturnAdjust
