120connecting to a TVNornal TVCamcorderComponent/AV cableSignal flowType B: Connecting a Component/AV cable for the composite output.Type B: Connecting a Component/AV cable for the composite output1. Connect the provided component/AV cable to the Composite jack, “Video and L-R (Audio)”on TV. Use the Green plug with the yellow label to connect to the Video input on your TV.• After the connection is complete, check the desired TV out method by setting “AnalogTV Out” to “Composite.” page 1032. Turn on the TV and set the input selector to the Input connection your camcorder isconnected to.• This is often referred to as “line.”• Refer to the TV instruction manual for how to switch the TV input.If the PB , PR, or Y jack receives the wrong direction from the connected cable, the TV screen appearsin red or turn out to be blue screen.• Check the connection status between the HD camcorder and TV, the TV screen may not deliverthe right video information if connected in a wrong way.• When the camcorder is connected to TV with more than one cable, the output signal is followed inthe order of priority:HDMI Component/AV output.• Do not use excessive force when connecting the cables.• For more information about the TV connection jack and the connecting method, refer to the TVuser manual.• Following method Type B above, the Green plug may not match the Video input on your TV dueto the VIDEO input being labeled differently. Sometimes the TV set has a “Y” input jack instead of“VIDEO.”• When the resolution is set to 1080/50p, the camcorder cannot output with the connected TVsimultaneously.
