20Getting StartedCharge the battery using the AC power adaptor or the USB cable.The charging indicator lights up and charging starts. After the battery is fully charged, the charging indicator turns green.Using the AC power adaptorConnect the AC power adaptor to the camcorder properly, and thenplug the AC Power adaptor in the wall outlet.Using the USB cableConnect the USB cable to the camcorder properly, and then connectthe other end to a USB port of a PC.Make sure that there are no foreign substances on the plug andin the socket when you connect the AC power supply to thecamcorder.Make sure to turn off the camcorder before disconnecting the ACpower adaptor. Otherwise, you can damage the storage media ordata.Use a nearby wall outlet when using the AC power adaptor.Disconnect the AC power adaptor from the wall outlet immediately ifany malfunction occurs while using your camcorder.Do not place the AC Adaptor in a confined space when you use it,such as between a wall and a piece of furniture.••••When charging, if both the USB cable and AC power adaptor areconnected, the AC power adaptor will override the USB.You cannot operate the camcorder using USB power only. Use theAC power adaptor or battery to power the camcorder.USB charging time may depend on the type of USB host on yourPC.If you use the camcorder while you are charging the battery, chargingmay take longer.Be sure to use the included AC power adaptor to power thecamcorder. Using other AC power adaptors could cause electricshock or result in fire.You can use the AC power adaptor around the world. However, youwill need an AC plug adaptor that matches the design of local walloutlets in some foreign countries. If you need an adaptor, purchase itfrom your distributor.••••••Charging the battery
