Connecting to a WLAN and configuring network settings74Wireless network (HMX-QF20 only)Manually setting the IP addressBy entering the IP address, you can connect to a WLAN via an AP(access point) in the wireless network service area.1 Press the [Home ( )] button p touch Social Sharing.2 Touch the Wi-Fi setting ( ) tab.The camcorder automatically searches for available AP devices.3 Touch the tab next to an AP.4 Touch IP Setting p Manual.Subnet MaskDNS ServerGatewayIPIP Setting0. 0. 0. 00. 0. 0. 00. 0. 0. 00. 0. 0. 0•5 Touch each submenu item and then enter the required valueusing the virtual keyboard. ¬page 75Item DescriptionIP Enter the static IP address.Subnet Mask Enter the subnet mask.Gateway Enter the gateway.DNS Server Enter the DNS address.6 Touch the tab.The camcorder connects to the network via the selected AP.For more information about the network settings, contact the networkadministrator or the service provider.The network settings may differ, depending on network conditions.Do not try to connect to a network that you have no permission toaccess.Use a fully charged battery while you are using network services.•••••
