125Make sure you’ve connected the camcorder to the correct input jacks. The TV screen may not display theright video information if connected incorrectly.When connecting to a TV using the Audio/Video cable, match the color of the cables to the color of thecorresponding jacks.Video input may appear green depending on the TV. If this occurs, connect the yellow plug of the Audio/Video cable to the green jack of the TV.When the camcorder is connected to a TV with more than one kind of cable, the camcorder outputs videosignals in the following order of priority:- HDMI Audio/Video (composite) outputThis camcorder is provided with the “TV Connect Guide” menu function. If you try to connect thecamcorder to a TV and don’t have your user’s manual, you can use the “TV Connect Guide” menufunction to view connection instructions on the camcorder’s screen. page 94If your TV has one audio jack (mono input), connect the yellow plug of the Audio/Video cable to the videojack, the white plug to the audio jack, and leave the red plug unconnected.Do not use excessive force when connecting the cable.When you connect the camcorder to a TV using the Audio/Video cable, Images recorded in high-definitionimage quality (1080/60i, 1080/30p or 720/60p) are played back in standard definition image quality.••••••••VIEWING ON A TV SCREENImage appearance depends on TV screen ratioSet “TV Type” according to the screen ratio of the TV connected to the camcorder. page 91Recording ratio Appearance on Wide (16:9) TV Appearance on 4:3 TVImages recorded in a 16:9 ratio:Video imagesPhoto imagesPhoto capture images•••Adjust the volume to a moderate level. If the volume is too high, the video information may includenoise.If “TV Display” is set “Off,” the TV screen does not display the camcorder’s OSD (On ScreenDisplay) menus. page 91••
