37BASIC CAMCORDER POSITIONINGUse both hands while taking a video or photo to prevent the camcorder from shaking.Try to avoid any slight movement while shooting.Aim the camcorder as shown in the illustration.1. Hold the camcorder with your both hands.2. Put your hand through the grip belt.3. Make sure your footing is stable and thereis no danger of colliding with anotherperson or object.4. Aim and focus as shown in the illustration.We recommend you keep the sun behindyou while shooting.Adjusting the shooting angleATTACHING THE FERRITE COREAttach the ferrite core to the cables. The ferrite core reduces interference.1. To open the ferrite core, release thestoppers on both ends of the ferritecore.2. Attach the ferrite core to the cable nearits connecter as shown in the figure.3. Close the ferrite core until it clicks shut.Take care not to damage the cable.StopperFerrite CoreWind the cable sothat it is not slack.