42When selecting Cable TV system :Press the ▲ or ▼ button to select “Cable” or “Air + Cable”,then press the ENTER button.Press the ▲ or ▼ button to select “Digital Channel”, thenpress the ENTER button.Press the ▲ or ▼ button to select “STD”, “HRC”, or “IRC”,press the ENTER button.Press the ▲ or ▼ button to select “Analog Channel”, thenpress the ENTER button.Press the ▲ or ▼ button to select “STD”, “HRC”, or “IRC”,press the ENTER button.Press the ▲ or ▼ button to select “Start”, then press theENTER button to memorize the channels.Note• STD, HRC, and IRC identify various types of cableTV systems. Contact your local cable company toidentify the type of cable system that exists in yourparticular area. At this point the signal source hasbeen selected. Proceed to “Storing Channels inMemory” on page 43.Auto ProgramT VMove Enter ReturnSelect the cable system.Digital Channel : STD √Analog Channel : STD √StartAuto ProgramT VMove Enter ReturnSelect the cable system.Digital Channel : STD √Analog Channel : STD √StartAuto ProgramT VMove Enter ReturnSelect the cable system.Digital Channel : STDAnalog Channel : STDStartSTDHRCIRCAuto ProgramT VMove Enter ReturnSelect the cable system.Digital Channel : STDAnalog Channel : STDStartSTDHRCIRCAuto ProgramEnter ReturnAuto Program in progress.Cable Channel 67Stop
