45Changing ChannelsUsing the Channel ButtonsPress the CH or CH button to change channels.When you press the CH or CH button, the TV changes channelsin sequence. You will see all the channels that the TV has memorized.(The TV must have memorized at least three channels.)You will not see channels that were either erased or not memorized.Directly Accessing ChannelsPress the number buttons to go directly to a channel. For example, to selectchannel 27, press “2” then “7”.When you use the number buttons, you can directly select channels thatwere either erased or not memorized. To change to single-digit channels(0~9) faster, press “0” before the single digit. (For channel “4” press “0”,then “4”.)Notes• For quick channel change, press the number buttons and then pressENTER button.• After the process of updating the channel information using CableCARDhas been completed, only the number of channels on the channel list canbe directly accessed.Using the PRE-CH button to select the previous channelPress the PRE-CH button. The TV will switch to the last channel viewed.To quickly switch between two channels that are far apart, tune to onechannel, then use the number button to select the second channel. Then,use the PRE-CH button to quickly alternate between them.Adjusting the VolumeUsing the Volume ButtonsPress the VOL or VOL button to increase or decrease the volume.Using MuteUsing the MUTE ButtonAt any time, you can temporarily cut off the sound using the MUTE button.1 Press the MUTE button and the sound cuts off. The word “MUTE” willappear in the lower-left corner of the screen.2 To turn mute off, press the MUTE button again, or simply press theVOL or VOL button.MUTE
