1101 Press the Menu button. Press the or button to select“Setup”, then press the ENTER button.2 Press the or button to select “Caption”, then pressthe ENTER button.3 Press the ENTER button to select “Caption”.Press the or button to select “On”, then press theENTER button.4 Press the or button to select “Caption Mode”, thenpress the ENTER button.Press the or button to select submenu(CC1~CC4 or Text1~Text4) you want, the pressthe ENTER button.• The default is “CC1”.CC1 : The Primary Synchronous Caption Service.These are captions in the primary languagethat must be in sync with the sound, preferablymatched to a specific frame.CC2 : The Special Non-Synchronous Use Captions.This channel carries data that is intended toaugment information carried in the program.CC3 : Secondary Synchronous Caption Service.Alternate program-related caption data,typically second language captions.CC4 : Special Non-Synchronous Use Captions.Similar to CC2.Text1 : First Text Service. This may be variousnon-program related data.Text2 : Second Text Service. Additional data,usually not program related.Text3/Text4 : Third and Fourth Text Services. Thesedata channels are used only if Text1 andText2 data bandwidths not sufficient.5 Press the EXIT button to exit.Notes• The Caption feature doesn’t work in COMPONENT, PC, HDMI(DVI) modes.• The availability of captions depends on the program being broadcast.Viewing Closed Captions (On-ScreenText Messages) - AnalogThe Analog Caption function operates in either analog RF channel mode or external signal mode.➤➤ Quick way to select Caption: Just press “CAPTION” button underthe cover of the remote control.Caption : On √Caption Mode : Default √Caption Options √CaptionT VMove Enter ReturnCaption : Off √Caption Mode : Default √Caption Options √CaptionT VEnter ReturnCaption : OnCaption Mode : DefaultCaption OptionsCaptionT VMove Enter ReturnDefaultCC1CC2CC3CC4Text 1Text 2Text 3Text 4Plug & Play √Language : English √Time √V-Chip √Caption √Menu Transparency : Medium √† MoreSetupT VMove Enter Return
