99Option 2: Setting the Clock AutomaticallyThe Clock can be set automatically if you are receiving a digital signal.1 Press the MENU button.Press the or button to select “Setup”, then pressthe ENTER button.2 Press the or button to select “Time”, then press theENTER button.Press the ENTER button to select “Clock”.3 Press the ENTER button to select “Clock Mode”.Press the or button to select “Auto”, then pressthe ENTER button.4 Press the or button to select “Time Zone”, thenpress the ENTER button.Press the or button to highlight the time zone foryour local area (and to move the highlight to theappropriate time zone on the map of the United States),then press the enter button.5 Press the or button to select “DST” (Daylight SavingTime), then press the ENTER button.Press the or button to select “Yes” or “No”, thenpress the ENTER button.6 Press the EXIT button to exit.Note• Depending on the broadcast station and signal,the auto time may not be set correctly. If this occurs,set the time manually.99-- / -- / ---- / -- : -- --Clock √Sleep Timer : Off √On Timer : Off √Off Timer : Off √TimeT VMove Enter ReturnClock Mode : Auto √Clock Set √Time Zone √DST : No √ClockT VMove Enter ReturnClockT VMove Enter ReturnClock Mode : AutoClock SetTime ZoneDST : NoPlug & Play √Language : English √Time √V-Chip √Caption √Menu Transparency : Medium √† MoreSetupT VMove Enter ReturnYesNoSelect the time zone in which you live.Time ZoneEasternCentralMountainPacificAlaskaHawaiiEnter ReturnMove
