English - 11S-Video ConnectionYour Samsung TV can be connected to the S-Video jack of a VCR.(This connection delivers a better picture when compared to the regular Video connection above.)1 To begin, follow steps 1–3in the previous section toconnect the antenna or cableto your VCR and your TV.2 Connect an S-Video Cablebetween the S-VIDEO OUTjack on the VCR and the AVIN 1 [S-VIDEO] jack on theTV.3 Connect Audio Cablesbetween the AUDIO OUTjacks on the VCR and the AVIN 1 [R-AUDIO-L] jacks onthe TV.An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)➢ Each VCR has a different back panel configuration.➢ When connecting a VCR, match the color of the connection terminal to the cable.Connecting a VCRVideo ConnectionThese instructions assume that you have already connected your TV to an antenna or a cable TV system (accordingto the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system.1 Unplug the cable or antennafrom the back of the TV.2 Connect the cable or antennato the ANT IN terminal on theback of the VCR.3 Connect an Antenna Cablebetween the ANT OUTterminal on the VCR and theANT 1 IN(AIR) or ANT 2 IN(CABLE) terminal on the TV.4 Connect a Video Cablebetween the VIDEO OUT jackon the VCR and the AV IN 1[VIDEO] jack on the TV.5 Connect Audio Cablesbetween the AUDIO OUTjacks on the VCR and the AVIN 1 [R-AUDIO-L] jacks onthe TV.➢ If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio inputjacks of the TV. If your VCR is stereo, you must connect two cables.➢ Each VCR has a different back panel configuration.➢ When connecting a VCR, match the color of the connection terminal to the cable.VCR Rear PanelTV Rear Panel2Audio Cable(Not supplied)5Video Cable(Not supplied)4Antenna cable(Not supplied)3VCR Rear PanelTV Rear PanelAudio Cable (Not supplied)3S-Video Cable(Not supplied)2Antenna cable(Not supplied)1