Samsung HP-T5044 Owner's Instructions Manual

Also see for HP-T5044: Manual Safety instructions Service manual User manual

Contents

English - 44Checking the Digital-Signal StrengthUnlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channelshave either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannotfine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digitalchannels.1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Channel, then press the ENTER button.2 Press the ▲ or ▼ button to select Signal Strength, then press the ENTER button.If the signal strength meter indicates that the signal is weak, physically adjust yourantenna to increase the signal strength.Continue to adjust the antenna until you find the best position with the strongestsignal.Press the EXIT button to exit.You can also press the ENTER button to select OK then press the EXIT button toexit the menu.LNA (Low Noise Amplifier)If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noisepreamplifier boosts the incoming signal).1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Channel, then press the ENTER button.2 Press the ▲ or ▼ button to select LNA, then press the ENTER button.3 Press the ▲ or ▼ button to select Off or On, then press the ENTER button.Press the EXIT button to exit.➢ If the picture is noisy with the LNA set to On, select Off.➢ The LNA setting must be made separately for each channel.Signal StrengthT VEnterOKAntenna : Air ►Auto Program ►Clear Scrambled Channel ►Channel List ►Name ►Fine Tune ►Signal Strength ►LNA : On ►ChannelT VEnterMove ReturnReturnAntenna : Air ►Auto Program ►Clear Scrambled Channel ►Channel List ►Name ►Fine Tune ►Signal Strength ►LNA : On ►ChannelT VEnterMoveAntenna : AirAuto ProgramClear Scrambled ChannelChannel ListNameFine TuneSignal StrengthLNA : OnChannelT VEnterMoveOffOnReturnReturn