24 EnglishConnectionsWireless NetworkYou can connect to the network with a Wireless IP sharer.A wireless AP/IP router is required to make a wireless network connection. Connect the wirelessLAN adapter to the Wireless LAN Adapter on the rear panel of the product.Set the network options. (See page 33)NOTEThis product is compatible with only Samsung's Wireless LAN Adapter. (not supplied) (Model name:WIS09ABGN).- The Samsung Wireless LAN Adapter is sold separately. Contact a Samsung Electronics retailer forpurchasing.You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stableoperation of the wireless network.)Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance,distance, obstacles, interference by other radio devices, etc).Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.When applying the security key for the AP (wireless IP sharer), only the following is supported.Authentication Mode : WEP, WPAPSK, WPA2PSKEncryption Type : WEP, AESFor the AllShare function, a PC must be connected in the network as shown in the figure.1.2.✎ 1)2)Connecting the FM AntennaConnect the FM antenna supplied to the FM ANTENNAJack.Slowly move the antenna wire around until you find alocation where reception is good, then fasten it to a wallor other rigid surface.NOTEThis product does not receive AM broadcasts.1.2.✎WIRELESS LAN5V 350mALANCOMPONENT OUTVIDEO OUTAUX INLANCOMPONENT OUTVIDEO OUTAUX INWireless IP sharerWireless LAN Adapter(not supplied)BroadbandserviceNetworking with PC forAllShare function(See page 63)PCHDMI OUTFM ANTHDMI OUTFM Antenna (supplied)HT-D4500_ELS_1223.indd 24HT-D4500_ELS_1223.indd 24 2011-12-23 3:58:542011-12-23 3:58:54
