Samsung HT-DL200 Instruction Manual

Also see for HT-DL200: Instruction manual Instruction manual Service manual

34Creating Realistic Sound Fields33You can use the following surround to reproduce a realistic sound field.• Digital Multichannel Surround —Dolby Digital and DTS Digital Surround• Dolby SurroundDolby Digital and DTS Digital SurroundTo enjoy surround effectively,all the speakers need to be connected and activated.Dolby DigitalUsed to reproduce multichannel sound tracks of the software encoded with Dolby Digital ( ).Dolby Digital encoding method (so-called discrete 5.1 channel digital audio format)records and digitally compresses theleft front channel,right front channel,center channel,left rear channel,right rear channel,and LFE channel signals (total 6channels,but LFE channel is counted as 0.1 channel.Therefore,called 5.1 channel).Since each channel is completely independent from the other channel signals to avoid interference,you can obtain muchbetter sound quality with much stereo and surround effects.In addition,Dolby Digital enables stereo rear sounds,and sets the cutoff frequency of the rear treble at 20 kHz,comparedto 7 kHz for Dolby Pro Logic.These facts enhance the sound movement and being-there feelings much more than DolbyPro Logic.When the system detects Dolby Digital signals,the DOLBY DIGITAL indicator lights up on the display.DTS Digital SurroundUsed to reproduce multichannel sound tracks of the software encoded with DTS Digital Surround ( ).DTS Digital Surround is another discrete 5.1 channel digital audio format available on CD,LD,and DVD software.Compared to Dolby Digital,audio compression rate is relatively low.This fact allows DTS Digital Surround format to add breadth and depth to the reproduced sounds.As a result,DTS DigitalSurround features natural,solid and clear sound.When the system detects DTS Digital Surround signals,the DTS indicator lights up on the display.Dolby SurroundUsed to reproduce sound tracks of the VCR tapes encoded with Dolby Surround ( ).This is only used for the sound sources coming through the AUX IN jacks.Dolby Pro Logic and Dolby 3 StereoDolby Surround encoding format records the left front channel, right front channel,center channel,and rear channelsignals (total 4 channels)into 2 channels.The Dolby Pro Logic decoder built in this system decodes these 2 channel signals into original 4 channel signals —matrix-based multichannel reproduction,and allows you to enjoy a realistic stereo sound in your listening room.When one of Dolby Surround is selected,the PRO LOGIC indicator lights up on the display.Manufactured under license from Dolby Laboratories. “Dolby,”“Pro Logic,” and the double-D symbol are trademarks of DolbyLaboratories. Confidential Unpublished Works. ©1992–1997Dolby Laboratories, Inc. All rights reserved.Manufactured under license from Digital Theater Systems, Inc.US Pat. No. 5,451,942 and other world-wide patents issuedand pending. “DTS” and “DTS Digital Surround” aretrademarks of Digital Theater Systems, Inc. ©1996 DigitalTheater Systems, Inc. All rights reserved.DSP FunctionTo Select a DSP• The DSP mode toggles in the followingorder each time the DSP button is pressed:HALL ➔ THEATER ➔ PAVILION ➔DANCE CLUB ➔ LIVE CLUB.DSP ModePress the DSP Mode button.What is a DSP?DSP synthetically recreates the soundfield to achieve a more realistic,powerful sound.To increase Effect level• The effect level can be set in steps from 1 to 4EFFECT1 ➔ EFFECT2 ➔ EFFECT3 ➔OFF(DEFAULT).Each time the button is pressed the selectionmoves to the next effect.• The higher the number, the stronger the DSPsurround effect will be.EffectPress the Effect button.What is a Effect?This sets the strength of the DSPmode.• DSP mode cannot be selected when a microphone is connected.• When playing a DVD encoded in two or more channels, DSP mode cannot be selected.