Samsung HT-DL200 Instruction Manual

Also see for HT-DL200: Instruction manual Instruction manual Service manual

38Troubleshooting• Is the disc installed with the label side facing up?• Is the power cord plugged securely into the power outlet?• Turn off the power to the unit by pressing the Power ( ) buttonand turn it back on.• Check the region number of the DVD.• DVD discs purchased abroad may not be playable.• This player cannot play CD-ROMs, DVD-ROMs, etc.• Check the rating level of the DVD.• Check whether the disc has any scratch marks or is deformed?The disc tray does notopen.Disc does not play.Playback does not startimmediately when thePlay/Pause button is pressed.• No sound is heard during high-speed playback, slow playback,and step motion playback modes.• Are the speakers properly connected? Is the speaker Setupcorrectly customized?• Is the disc severely damaged?The disc may be dirty. Wipe off fingerprints or dirt.No sound is produced.• Was the player moved suddenly from a cold pace to a warm one?When condensation forms inside the player, remove the discand let the player stand for 1 or 2 hours with the power on.(You can use the player after the condensation disappears.)Picture does not appear; soundis not produced; the disc trayopens 2-5 seconds later.• Are the speaker cables loose?• Is there any dirt or debris at the end of the speaker connector?Sound quality isirregular.• When listening to a CD or radio, sound is output to the frontspeakers only (L/R). Select the “PRO LOGIC” option by pressingthe Pro Logic button on the remote control unit to use all sixspeakers.• Check whether your DVD disc is 5.1 CH compatible.Sound can be heard onlyfrom a few speakers andnot all six.• Does the disc being played show the “Dolby Digital 5.1CH” mark ?5.1-channel sound is reproduced only if the disc is recorded with5.1 channel sound.• Is the DVD player connected to the proper speakers?Dolby Digital 5.1 ChannelSurround Sound is notbeing reproduced.Problem CheckSleep Function37To set up Sleep• Each time the button is pressed the selectiontoggles as follows: SLEEP 10 ➔ SLEEP 20➔ SLEEP 30 ➔ SLEEP 60 ➔ SLEEP 90➔ SLEEP 120 ➔ SLEEP 150 ➔ OFF.• The remaining time for the selected Sleep time is displayed.• Pressing the button once again changes the Sleep time from thelast setting.SleepPress the Sleep button.What is theSleep function?You can set the delay time so thatthe unit powers off automaticallyafter a preset period of time.To Review Sleep Setting

/ 23

Related manuals for Samsung HT-DL200