Samsung HT-J4200 User Manual

Also see for HT-J4200: User manual

Contents

19 - EnglishSettings8. Unzip the zip archive to your computer. Youshould have a single folder with the same nameas the zip file.9. Copy the folder to a USB flash drive.10. Make sure no disc is inserted in the product,andthen insert the USB flash drive into the USB portof the product.11. In the product’s menu, go to Settings >Support > Software Upgrade.12. Select By USB.13. The home cinema searches for the software onthe USB drive. When it finds the software, theUpdate Request pop-up appears.14. Select OK. The home cinema turns off, turns on,and then begins the upgrade. When the upgradeis done, the home cinema turns off.15. Press the POWER button to turn on the homecinema.✎ There should be no disc in the product when youupgrade the software using the USB Host jack.✎ When the software upgrade is done, check thesoftware details in the Software Upgrade menu.Auto Upgrade NotificationIf your product is connected to the network and youset Auto Upgrade Notification on, the product willnotify you if a new software version is available with apop-up message.1. Turn on the product.2. In the Software Upgrade menu, set AutoUpgrade Notification to On.If there is a new software version available, theproduct will notify you with a pop-up message.3. To upgrade the firmware, select Yes. Theproduct turns off automatically, turns on, andthen begins the upgrade.4. The update progress popup will appear. Whenthe update is complete, the product will turn offautomatically again.5. Press the POWER button to turn on theproduct.Setting Up DLNADLNA lets you play music, video, and photo filesstored in your PC through your home cinema.To use DLNA, you must install DLNA software oralready have DLNA software installed on your PCand connect the home cinema to your PC via yournetwork (See page 10).✎ PCs running Windows 7 and Windows 8 haveDLNA software (Play To) built in.