Samsung HW-C700B User Manual

Contents

39ENG ● SETUPSETTING THE TEST TONEUse the test tone to check the speaker connection status or level.Press the SETUP/MENU button.Each time the button is pressed, the mode switches between SETUPENTER and SETUP OFF.Press the ENTER button to select SETUP ENTER.Press the ▲▼ buttons to select TEST TONE, and then press the ENTERor ► button.Press the ▲▼ buttons to select the option you want, and then press theENTER or ► button.AUTO : Test signal will be automatically output as follows; F.L Æ CENÆ S.W Æ F.R Æ S.R Æ SBR Æ SBL Æ S.L.- During test tone output, press the ▲▼ buttons to adjust the speakeroutput level from -10 to +10 dB by 1 step.MANUAL : Enables you to adjust the output level of the speakermanually.1) Press the ENTER button to select the speaker you want.Each time you press the ENTER button, F.L Æ CEN Æ S.W Æ F.RÆ S.R Æ SBR Æ SBLÆ S.L will be selected in turn.2) Press the ▲▼ buttons to set the Test Tone mode you want.You can adjust the speaker output level from -10 to +10dB by 1 step.The sound gets quieter at -10dB and louder at +10dB.- Test Tone Output -• F.L (front left) : -10 ~ +10dB • CEN (center) : -10 ~ +10dB• F.R (front right) : -10 ~ +10dB • S.W (subwoofer) : -10 ~ +10dB• S L (surround left) : -10 ~ +10dB • SBL (surround back left) : -10 ~ +10dB• S.R (surround right) : -10 ~ +10dB • SBR (surround back right) : -10 ~ +10dB- To stop test tone -Press the SETUP/MENU button once.SETUP OFF appears on the display and test tone stops.In the Dolby Pro Logic IIz mode, test signal will be automatically output as follows : F.L Æ FHL Æ CEN ÆS.W Æ FHR Æ F.R Æ S.R.1.•2.3.4.•••M ÆÆÆÆHW-C700-C770S-C770BS-XAA_0609.in39 39HW-C700-C770S-C770BS-XAA_0609.in39 39 2010-06-09 5:07:362010-06-09 5:07:36