49ENG ● OPERATIONLISTENING TO THE RADIOYou can listen to the radio by using either automatic or manual tuning.Press the INPUT SELECT button to select FM.Select a frequency (radio broadcast).Preset tuning :Press the #,$ buttons on the remote control to select the preset frequency.Manual tuning 1 (Automatic tuning):Press and hold the TUNING/CH ( .,, ) buttons on the remote control to automatically tune in afrequency.Manual tuning 2 :Press the TUNING/CH ( .,, ) buttons on the remote control to increase or decrease thefrequency step by step.You can also use the SELECT (.,,) button on the main uint to change the radio frequency.To Listen in mono/stereoPress the MO/ST button on the remote control.Each time you press this button, STEREO or MONO will be selected in turn.If you select MONO in an area with weak reception, it will help to reduce noise.This function works only with the remote control.Presetting radio stationsYou can preset up to 30 FM stations.E.g.: Setting station FM 89.10 in preset 2.Press the INPUT SELECT button to select FM.Press the TUNING/CH ( .,, ) buttons on the remote controlto select 89.10.Refer to step 2 above to tune in automatically and manually.Press the MEMORY button on the main unit.You can also use the TUNER MEMORY button on theremote control.Tuner number will blink on the display.Press the TUNING/CH ( .,, ) buttons on the remote controlto select preset 2.You can select from presets 1 to 30.Press the MEMORY button on the main unit.Tuner number will disappear and station 89.10 will besaved in preset 2.To preset other stations, repeat steps 2 to 5.To Listen to Preset StationPress the TUNING MODE button to select PRESET and press the SELECT ( .,, ) buttons.1.2.•••M •••1.2.•3.••4.•5.•6.•ÆÆÆHW-C700-C770S-C770BS-XAA_0609.in49 49HW-C700-C770S-C770BS-XAA_0609.in49 49 2010-06-09 5:07:402010-06-09 5:07:40