090Starting the Multi Slide Show ( )You can select image to view1. Use the Up / Down button to select the[Images] menu and press the Right button.2. Select a desired sub menu by pressingthe Up / Down button.[All] : All images saved in theMemory are played back.Press the OK button and the settings are saved.[Date] : Images taken in a specified date are played back.Press the OK button and the settings are saved.[Select] : Play only the selected images. If you press the Up /Down button, you can select the desired images to playback. The selected image can be saved as [Select1],[Select2] and [Select3]. If you save the selected imagewith the [New Select] command, it will be saved as[Select1]. But when a new image is saved again using[New Select], the former image which had been savedas [Select1] will be saved as [Select2] automatically.You can change and cancel the images which weresaved as [Select1], [Select2] and [Select3]. Press theFn button and the settings are saved.3. Select [Play] or [Repeat] in the [Start] menu to start the multislide show.Selecting Images Setting play intervalSet the Multi Slide Show play interval.1. Select the [Interval] sub menu bypressing the Up / Down button andpress the Right button.2. Use the Up / Down button to selectthe desired interval.3. Press the OK button to save theconfiguration. The loading time depends on the image size and quality. While the Multi Slide Show is playing, only the first frameof a Movie file is displayed. While the Multi Slide Show is playing, the voice recording filewill not display. The interval menu functions in the [Off] menu only.Back SetImages :AllInterval :1 secMusic :OffEffect :OffStartAllDateSelectBack SetImages :AllInterval :1 secMusic :OffEffect :OffStart1 sec3 sec5 sec10 sec